The Best Pwm Fan Controller for Dual Cooling Radiator Fans
Born to push the limits
LANCOOL II MESH Performance features a mesh front panel and operate bottom left shroud empanel, honeycomb vent design and built-in PWM fans, ensuring freehanded air flow delivered to your components while the system of rules runs at peak functioning.
THE Last CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE
- Premium attend
- Unprecedented modularity
- Hinged flip panels every last roughly
- Optimized cooling suffer
- Cable system management with ease
- Optimized storage configuration
EXQUISITE STEEL CRAFTSMANSHIP
Interlocking intakes spanning the front panel guarantee sufficient flow of air in and out of the system, allowing it to melt down at peak performance.
Many ADVANCED COOLING SUPPORT
Optimized airflow is a result of the collaboration between the brand-new-sprung mesh design, additive exhaust vent holes, and three high-performance PWM chilling fans.
Operate Stern Unexhausted Cerement PANEL
HIGH-PERFORMANCE BUILT-IN PWM FANS
2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust devotee in the back of the PERFORMANCE EDITION produce ample airflow, keeping your scheme running at peak performance.
Front: 2 x 140mm PWM fans
140mm PWM fans
- RPM run: 600~1200 RPM
- Static pressure: 1.49mmH2O (maximum)
- Air flow: 60.56 CFM (maximum)
Endorse: 1 x 120mm PWM fans
120mm PWM fans
- RPM roam: 600~1500 Rev
- Motionless pressure: 1.78mmH2O (maximum)
- Air flow: 54.6 CFM (maximum)
EXPERIENCE FAN CONTROL Happening A WHOLE NEW LEVEL
The four-mode fan restrainer on the top front allows you to have fan control happening a whole new plane. Select L for casual use like-minded net browsing, urge on H when you're pushing your GPU(s) and Mainframe rocky.
The included hub supports up to 6 PWM fans with either 3-PIN operating theatre 4-PIN headers.
Note! The hub supports fans with either 3-PIN or 4-PIN cope. Yet, if you intend to synchronize and control devotee speed and disturbance level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.
MODULAR PSU SHROUD COVER
The space between the top and bottom chamber today features two removable PSU shroud covers to house either 2 x 2.5" SSDs or can be removed to fit 2 x 120mm fans.
Compared to the former tightly knit plan, the modular PSU shroud covers allow users to slay them for an unobstructed airflow betwixt the top and bottom chamber.
When 2 fans are affixed, and the enshroud plates removed, ventilation efficiency is even better.
Straight when 2 x SSDs are mounted, the vents on the PSU shroud covers guarantee nifty ventilation system.
MULTI-WAY FAN/RADIATOR Square bracket
The multi-fashio bracket revolutionizes your notion of fan/radiator installation by offer 4 installation options to superfine fit your needs.
55MM scenario
Closer to the motherboard for more direct cooling
110MM scenario
Nearer to the front panel for thick radiators
HOW TO Put in THE MULTI-WAY FAN/RAD BRACKET
The multi-way bracket revolutionizes your notion of sports fan/radiator installation aside offering 4 installation options to best fit your motivation.
ATTENTION!
Coiffe not install a 140/280MM radiator in the inner side of the bracket otherwise irrepairable distortion might occur. The correct way to install is to mount fans first then place a radiator connected top of the fans.
OPTIMIZED Memory board CONFIGURATION
With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding rising to 9 drives.
TOOLLESS Slippery Drive off CAGE
Slide the hard drive cage on its merchant ship track to the perspective that Charles Herbert Best fits your interior contour.
DRIVE INSTALLATION GUIDE
SUPPORT Dormy TO 9 DRIVES
Modular drive cage: 3 x 3.5" HDDs/2.5" SSDs
Side-mounted SSD bays behind motherboard tray:
2 x 2.5" SSDs
Position-mounted SSD bays at the merchantman right flip shroud:
2 x 2.5" SSDs
SHOP NOW ON NEWEGG
OPTIONAL Kit out
LANCOOLII-1X
Vertical GPU Kit
LANCOOLII-3X
Hot-swappable Back Plate
LANCOOLII-4X 3.1 Character C Transmission line
GB-001X Anti-sag GPU Angle bracket
Note:
In the condition of exploitation the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, delight follow yow steps to set finished your BIOS to make it matched.
1.Shuffle sure that your motherboard BIOS is the latest version. If non, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, rig the PCIE slot from "Auto" to "Gen 3". (Example pic as below, for more please read the hand-operated of your motherboard)
4. Save your settings and turn soured the arrangement
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the organisation would be capable to work.
DOWNLOAD
SPECIFICATIONS
| Model | LANCOOL II MESH Functioning |
| Dimensions | (D) 478mm x (W) 229mm x (H) 494mm |
| Motherboard | E-ATX(width: under 280mm)/ATX/M-ATX/ITX |
| PSU | 210mm |
| Color | black |
| Materials | Steel 4.0mm tempered field glass (some sides) |
| Lover Support | Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm operating theater 2 x 140mm Peak of PSU chamber: 2 x 120mm |
| Radiator | Strawma (multi-direction fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (allied to the leftist) |
| VGA Length | 384mm |
| CPU Clearance | 176mm |
| Labor | Behind MB Tray: 2 x 2.5″ SSDBehind the right somersault panel: 2 x 2.5"SSD Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD Above PSU Chamber: 2 x 2.5″ SSD |
| Slot | 7 |
| I/O Ports | 1 x Fan speed control button1 x TRRS Audio frequency 2 x USB 3.0 1 x USB 3.1 TYPEC |
| Sprinkle Filters | 1 x Tip (magnetic), 1 x Bottom (tray) |
| Incl Fans | 2 x 140mm PWM Fan (front) Rated Velocity:600 ±200 (30% Tariff)-1200RPM ±10% Air Flow:60.56CFM Racket:25.8dB(A)1x 120mm PWM buff (hind end) Rated Speed:600 ±200 (30% Duty)-1500RPM ±10% Airflow:54.6CFM Randomness:26.1dB(A) |
The Best Pwm Fan Controller for Dual Cooling Radiator Fans
Source: https://lian-li.com/product/lancool-ii-mesh/
